June 10, 2023

After having mastered the difficulties of maintaining the rifle, the gun holder must be able to properly align the rifle with the target, and exactly the same for each shot. This is true for the smaller sized handguns as well. The shooter is the only final judge as to where his eye should focus. The instructor or trainer insists on this by advising the shooter to focus on his target and then focus on the handlebars.

Alignment of the rifle

Aligning rifle sighting bodies on the target is very important. This involves placing the tip of the handlebar in the center of the opening of the sight. Any misalignment between the front and the back fake the shot. For example, over a distance of 25 meters, any misalignment of the rifle is multiplied by 50. So if the ball is misaligned 1/10 by inch, on a target at 300 meters, it deviates by 5 feet! Such alignments are perfectly done in case of the Maryland Handgun Course.

Focusing with the eye

A correct shooting position places the eye directly in line with the center of the rifle aperture. When the eye is focused on the handlebars, the natural ability of the eye in relation to the center objects in a circle is to look for the brightest point of light (center of the aperture) while providing the correct alignment of the view. As a result, the target appears blurry, while the handlebar is clearly seen. This is to leave the target “blurred” behind the handlebar clearly visible in front of the target.

Correct image

Once the soldier can properly align his line of sight, he can get a correct image of the target, with the handlebars and the aligned sight. Visual projection consists of two basic elements: alignment and positioning of the aiming point. The placement of the aiming point varies according to the distance to the target. For example, the figure below shows a silhouette located at 300 meters where the point of aim is the center of mass, and where the sighting devices are aligned to have a correct image.

Breathe Control

In order to improve his skills, the shooter must also learn to control his breath at any point in his breathing cycle. Two types of breath control techniques are practiced during firing. The coach / trainer ensures that the shooter uses both breathing techniques and understands them and in particular, by enjoining him to exaggerate his breathing. The shooter must be aware of the range of movement of his weapon (although spotted on a target) because of his breathing.

The first technique is used when the shooter has a little time available to execute his shot. There is always a moment of natural breathing pause where most of the air has been expelled from the lungs before the next inhalation. To prepare for the best phase for stability, breathing should stop after most of the air has been exhaled during the normal breathing cycle. The shot must be fired before the soldier feels any discomfort. In the Maryland Handgun Course, you will be able to have the best ideas regarding the techniques.

Alton Pich

Comments are closed.